• date_rangePosted On :   Dec 01' 2008
• location_cityCity :   Qld
• languageCountry :   Australia
• content_pasteEnquiry No. :   8120136

Hello,

Greetings from Australia. I am looking for a supply of Tungsten
alloy crankshaft balancing weights, 19.022mm to 19.025mm diameter,
i.e. 3/4 inch x 3/4 inch 'slugs' that will be a press fit into the holes
we have ground into our crankshaft webs, that have a diameter of
19.02mm +0 / -0.05mm.

We require at least 400 of these Tungsten alloy pieces - in at least a
density of 16.9 G/CC.

Also acceptable are weights made from 19mm diameter bar.