• date_rangePosted On :   Oct 04' 2004
• location_cityCity :   Swabi
• languageCountry :   Pakistan
• content_pasteEnquiry No. :   4100472

Dear Sir
Thanks for your early e-mail

We are interested in the following machines
so if you have any information about the availability of
these machines with you or any where else in your country
please let us know.
The list is as follows.

1.Moulds for luer lock 3CC and 5CC 3 parts syringes.
We need Luer Lock type of syringe. In this type of syringe
the needle is fixed by rotating the needle

Moulds
The Moulds, which we need, are two sets
One set for 3 cc syringe and another for 5 cc syringe
One set of mould has actually three components
One component makes the outer part of the syringe
called Barall of 28 cavities
The second component is inside the syringe and is called
the Plunger of 28 cavities

The third part is the black small rounded part called
Gaskit of 48 cavities
2.Syringe assembly machine for 3cc .
3.Syringe assembly machine for 5cc.
4.Syringe printing machine for 3cc .
5.Syringe printing machine for 5cc.
6 Syringe printing machine for 3cc and 5cc combined.
7. E.O. gas sterilizer 10 cubic feet capacity.
8 Pouch sealing machine.
9. Blister packing machine, with needle and syringe dies.
10. Chiller

My data is as under
Your faithfully
Chief Executive