• date_rangePosted On :   Jun 29' 2008
• location_cityCity :   Amman
• languageCountry :   Jordan
• content_pasteEnquiry No. :   8062949

Dear Sirs:
We'd kindly inform you that we need anodizing tank for aluminum
profiles , specification as follows :

The external supports are of steel plates 160 x 15 - 160 x 12 - 120 x 10
The edges are of L steel sheet 180 x 60 x 5 mm
Coating external : anti-acid paint
Coating internal : PVC thickness 2.0 mm
each tank is complete of
Double electric armature with alum bars in opposed entries
side section bars : Sq. mm 5000
Central section bars : Sq. mm 10000
Head section bars : Sq. mm 20000
cathode made of extruded aluminum
section: Sq. mm 1440
cathode perimeter : mm 440
No. 66 external cathodes ; No. 34 central cathodes
No. 3 supports bearing the central branch of the electrical armature
consisting of:
Iron pipe fastened on tank bottom and protected with the PVC pipe.
Bottom plates coated with PVC sheet
Pipe caps with guide for central bars
No. 1 frame consisting of PVC tubular for protection of cathodes and
bearing the air tubes for stirring.
No.1 bath stirring consisting of two PVC Dia. 32 mm tubes.
No. 2 V supports of steel inox AISI 304 for anodic bars.
No. 1 PVC socket complete of bush, collar, NP 10 ND 100 flange for
sulphuric acid inlet
No. 1 PVC socket complete of bush, collar, VP 10 ND 100 Flange for sulphuric acid outlet.
complete of screw assemblies.
No. 1 PVC drilled pipe dia. 110 mm complete of supports for cooling sulphuric acid distribution.
No.1 steel flange NP 10 ND 50 coating with PVC
No. 1 PVC discharge valve NP 10 ND 80
No. 1 water inlet with dia. 32 mm - PVC tube
No. 1 inlet of sulphuric acid with PVC dia. 32 mm - tube
Specification
Working temperature : 21 C
Capacity : cu.m 29.5
Internal dimensions : 8500 x 1400 x 2500 mm
External dimension : 8860 x 1760 x 2660 mm
Temperature in the tank may be between 10 - 60 C
Current in tank 20000 A
Voltage 20 V
Concentration of sulphuric acid 160 - 220 g/L

Quantity : One Tank

Acid Neutralization Tank
Description:
Tank are of steel sheet thickness 5 mm
The external support are of steel plates 160 x 15 - 160 x 12 - 120 x 10
The edges of L steel sheet 180 x 60 x 5 mm
Coating external : anti-acid paint
Coating internal : PVC thick 2 mm

Complete with No. 2 Supports of steel inox for anodic bars
No. 1 PVC exhuast valve NP 10 ND 80
No. 1 PVC tube dia. 32 and joints for water inlet
No. 1 PVC tube dia.. 32 and joint for acid inlet.

Specification:
Working temperature : room temp.
Capacity : cu.m 25.5
Internal dimensions : 8500 x 1200 x 2500 mm
External dimensions : 8860 x 1560 x 2660 mm
Acid con. ( 50-100) g/L

Quantity : One Tank
Rinsing Tank

Description :
Tank are of steel sheet thickness 5 mm
The external support are of steel plates 160 x 15 - 160 x 12 - 120 x 10
The edges of L steel sheet 180 x 60 x 5 mm
Coating external : anti-acid paint
Coating internal : PVC thick 2 mm

Complete with
No.1 bath stirring consisting of one PVC dia. 32 mm - tube , drilled and
fastened with adequate supports on tank bottom
No. channel - shaped sluice for the upper level, made of steel sheet
dimension in 200 x 180 x 5 mm
No.2 Supports of steel inox for anodc bars
No. 1 PVC dia. 100 exhaust valve NP 10 ND 80
Vo.1 PVC tube dia. 40 and joints for water inlet.

Specification
Working temperature : room
capacity : cu.m. 25.5
Internal dimension : 8500 x 1200 x 2500 mm
External dimension : 8860 x 1560 x 2660 mm

This tank is use to remove the effects of solution of cleaning ,
etching, neutralization and anodizing tanks

Quantity : One Tank

Accepting our best regards