• date_rangePosted On :   Dec 21' 2006
• location_cityCity :   Sydney
• languageCountry :   Australia
• content_pasteEnquiry No. :   6122123

Wish to import the following:
Permanent magnet DC motor up to 192 volts DBL 1. 125" CE shaft
19hp, 9. 1" dia
Diameter 8. 25"
Length: 16. 7"
Mounting pattern: ADC 9"
De length 1. 5"
De diameter: 1. 125"
De keyway: 0. 25" x 1. 130"
De pilot hole: 0. 688" dia
CE length: 2. 00"
CE diameter: 0. 875"
CE mounting holes: 1 / 4-20
Case steel 1020 or similar
Shaft steel: 1144 stress proof
Class "H" insulation is used throughout the motor.
The drive shaft and tail shaft have standard keyways cut
into them.
One hour HP rating = 28 HP at 89 volts (HP dramatically
increases as voltage is increased)
The motors I am looking for are for on road street car
electric vehicles 9"
Here is example:
Motor 9"-one hour HP rating = 28 HP at 89 volts

(HP dramatically increases as voltage is increased)
Motor does not have to be exact but the closer the better.