We are looking for a reliable Laser cutting,
bending and MIG-welding company which has also the
possibility for powder coating.
Shipment from you to us (Thailand) will be made by container
(40 units/each).
Specification:
400+ units/year
LxWxH:1500x450x1350mm
Design is optimised for almost no jig/fixtures
Steel ST 52 or similar
Weight 220 kg/unit
Certified welder but no welding certification for the product
needed
==> This is an existing product <==
Please inform until 28.08.2006:
1.) Check and give us - based on your experience - your
first price estimation
2.) Inform about your price structure for our estimation:
Material cost (xx$/kg), Laser cutting (xx$/min), Bending
(xx$/h), Welding (xx$/h), Powder Coating (xx$/kg or xx$/m2)
3.) Inform if you can do all working steps or if you are only
interested in part of it (e. G. Material + Laser cutting)
4.) Send us your company profile
5.) Send us a map where your company is located ?
for inspection on site
6.) Send us for reference some pictures of similar products
you produce
We will send you after drawings for final calculation
date_range May 31' 2024/ Japan
date_range May 30' 2024/ Norway
date_range May 13' 2024/ Malaysia
date_range May 10' 2024/ UAE