• date_rangePosted On :   Jun 30' 2006
• location_cityCity :   Arizona
• languageCountry :   USA
• content_pasteEnquiry No. :   6063062

If your company can produce special-shape labels in
mylar/polyester, please read the following.

We need a special shape label in mylar/polyester, fine matte
finish. Permanent adhesive is.05mm thick, mylar is.2 thick,
printing is 2 colors (black and Pantone Yellow) on back
surface, between adhesive and mylar.

Please note that polyester can be difficult to die cut, so
please do tests to make sure your processes will work.
I mention this because another vendor has had production
problems with cutting this label.

Overall label thickness must be.3 +.07-.03 mm.
Extra ink layer may be applied to achieve proper thickness.

On approval, we can send. AI(Adobe Illustrator) file with
full dimensional information, etc.