• date_rangePosted On :   Apr 29' 2004
• location_cityCity :   Sharjah
• languageCountry :   UAE
• content_pasteEnquiry No. :   4042988

Tank Container TCM5-25BM, Technical
Specification

Characteristics Value
1. Capacity, I 24700
2. Unladen mass (tare), kg 8350
3. Maximum gross mass, kg 24000
4.Maximum allowable working pressure, bar 20.4
5. Test Pressure 28.2
6. Dimensions in accordance with ISO668: 1995
1CC Length, mm 058Width, mm 2438 weight, mm 2591
Distance between corner castings openings
by length, mm 5853?3
by width, mm 2259?3
7. Temperature range, ?c -40...+55
Design temperature + 60
8. Tank 09 2 -14, 5520-79 Low alloy steel
Cylinder part -16 mm
Ends -17 mm
9. Frame work 09?2?-14, OC 19281-89 Low alloy steel
10. Internal piping 12X18H10T Stainless steel
11. Sunshield two layer steel structure covered with fire
protective composition
12. Baffles and deflectors Optional
13. Corner castings
Upper: to ISI 1161:1984
Lower: Blair BLR 4450
14. Manhole DN 500 mm, located on the rear end of the tank
15. Walkways None
16. Ladders None
17. Safety relief valve Fort Vale, 006/22685
18. Rupture disk Optional
19. Liquid level gauge Ultrasonic, two level
20. Pressure gauge S0140
21. Thermometer Productions MCT 150 Analogue
22. Location of discharge equipment Bottom, on the
cylinder part of the tank or on the rear end, in valve box.
23. Liquid line Fort Vale assembly
888/2523500L, 2", ACME 31/4?
24. Gas line Fort Vale assembly 888/2523500R,
2", 11/4"
25. Remote control at emergency A 10 m steel cable,
internal valves interconnected, fire Safe fuse
26. Internal cover Zinc containing composition
27. External cover Zinc containing primer, fire protective
composite (shields only) painting.
28. Serviceability, years 25
29. Approvals and design documentation (Rules of Russian
Maritime Register of Shipping), IMO (IMDG), RID/ADR,
EN 1432:1997, CSC, CCC, UIC, ISO 1496- 3:1995, ISO 6346:
1995, ISO 1161:1984, OCT14249-89, OCT 26 291-94.

Shipment Mode: See Comments Below