• date_rangePosted On :   May 29' 2011
  • location_cityCity :   Verona
  • languageCountry :   Italy
  • content_pasteEnquiry No. :   B-116717

Urgent request for quotation

Dear Sir/Madam,

I contact you because ours, Italian trading company specialized in
international tenders, is looking for a tender financed by
World Bank in Kenya, for a manufacturer able to provide us
various items that could be of your production.

Technical requirements and quantities are the following:

BCEE 137
Lot 1
Cross-cut saw

Use: Making crosscuts.
Standard:
? BS 3159-1
Description:
10 to 12 point for fine work a
7 or 8 point for faster cutting.
Ten teeth per inch for general purpose,
12-point used for cabinet work.
Teeth shaped like knife points to crumble out wood between cuts.
Best cutting angle is about 45?.
Blade lengths range from 20" to 28" (508mm to711mm)

Quantity=10

BCEE 138
Lot 1
Rip saw

Use: Cutting timber parallel to the direction of the grain

Standard:
BS 3159-1
Description:
Chisel shaped teeth,
? teeth per inch,
Made to cut with the wood grain.
Blade length: from 24" to 28" (610mm to 711mm)
Teeth are cross-filed
Cutting angle at 60? angle to the surface of the board being cut.
The ripping action of the saw produces a coarse, ragged cut
which makes the saw unsatisfactory for finish work.

Quantity=10

BCEE 139
Lot 1
Tenon saw

Use: Cutting across the grain
Standard:
BS 3159-1
Description:
The stiffened edge may be made of metal or wood
Has rip-filed teeth for rip cutting and cross-cut for cutting across the grain.
Fine teeth, with 13 teeth per inch

Quantity=10

If available, I kindly ask you to reply to my email within Sunday
evening including the following information:

Quotation ex-work;
A brochure in English of offered goods;
Origin of offered goods.

Since this is for a tender I kindly ask you to offer a model
compliant to all requirements or better.

I remain at your disposal for any other information you may need.

I look forward to receive your reply and confirm of your interest
in the quotation.

Best regards,
Urgent request for quotation

Dear Sir/Madam,

I contact you because ours, Italian trading company specialized in
international tenders, is looking for a tender financed by
World Bank in Kenya, for a manufacturer able to provide us
various items that could be of your production.

Technical requirements and quantities are the following:

BCEE 137
Lot 1
Cross-cut saw

Use: Making crosscuts.
Standard:
? BS 3159-1
Description:
10 to 12 point for fine work a
7 or 8 point for faster cutting.
Ten teeth per inch for general purpose,
12-point used for cabinet work.
Teeth shaped like knife points to crumble out wood between cuts.
Best cutting angle is about 45?.
Blade lengths range from 20" to 28" (508mm to711mm)

Quantity=10

BCEE 138
Lot 1
Rip saw

Use: Cutting timber parallel to the direction of the grain

Standard:
BS 3159-1
Description:
Chisel shaped teeth,
? teeth per inch,
Made to cut with the wood grain.
Blade length: from 24" to 28" (610mm to 711mm)
Teeth are cross-filed
Cutting angle at 60? angle to the surface of the board being cut.
The ripping action of the saw produces a coarse, ragged cut
which makes the saw unsatisfactory for finish work.

Quantity=10

BCEE 139
Lot 1
Tenon saw

Use: Cutting across the grain
Standard:
BS 3159-1
Description:
The stiffened edge may be made of metal or wood
Has rip-filed teeth for rip cutting and cross-cut for cutting across the grain.
Fine teeth, with 13 teeth per inch

Quantity=10

If available, I kindly ask you to reply to my email within Sunday
evening including the following information:

Quotation ex-work;
A brochure in English of offered goods;
Origin of offered goods.

Since this is for a tender I kindly ask you to offer a model
compliant to all requirements or better.

I remain at your disposal for any other information you may need.

I look forward to receive your reply and confirm of your interest
in the quotation.

Best regards,

Small Hand Tools

date_range Jun 24' 2022/  Indonesia

Now we need to buy small sized pliers, saws, pincers, screwdrivers, cutting tools and drilling tools. We will buy these stainless steel and alloy hand tools in bulk. Our company...
Drilling Tools and Accessories

date_range Jun 23' 2022/  Singapore

We would like to buy PCB drills made up of solid tungsten carbide blanks/rods in various shapes and sizes. Samples are needed to check the quality. Our company was...
Importing Hand Tools

date_range Jun 16' 2022/  Belgium

We would like to buy hammers, wrenches, cutters and screwdrivers for industrial use in bulk. We are a wholesaler of hardware, concrete articles and plastic parts for the garden world,...
Industrial Hand Tools

date_range Jun 13' 2022/  Kuwait

We would like to buy cutting tools, knives, pliers, hammers, drilling tools and blades for industrial use. We will buy these stainless steel, tungsten carbide and alloy tools in bulk....