• date_rangePosted On :   Feb 24' 2009
• location_cityCity :   Jalisco
• languageCountry :   Mexico
• content_pasteEnquiry No. :   9022467

Dear Sir,

We want to separate Ag2S from an aqueous solution, therefore we are
looking for the following equipment:

Continuous flow centrifuge to separate fines from solution.
The inside of the rotor that holds the mud or slurry should be
stainless steel, naylamid or bronze.
Required energy: 110 Volts
Incoming flow: 500 liters/hour
Mud or slurry (Ag2S) capacity: 400 to 500 gr
Solids: less that 1.5%
Rotator speed: up to 7,000 rpm