• date_rangePosted On :   Aug 02' 2008
  • location_cityCity :   Karachi
  • languageCountry :   Pakistan
  • content_pasteEnquiry No. :   8080258

Inquiry for Forging of Gear

Dear Sirs,
We are pleased to post an inquiry for forging of gear.
Details are given below:

01). Forging of Gear (60 Teeth),
As per drawing no. C70 629,
Material: din c50 or bs970 080 m40,
Quantity: 60 pcs.

Drawing may be downloaded from our website

02). Forging of Gear (60 Teeth),
As per drawing no. C70 445,
Material: din c50 or bs970 080 m40,
Quantity: 40 pcs.

Drawing May Be Downloaded From our website

Chemical Composition: (DIN C50)
C: 0.47 - 0.55 %,
Mn: 0.60 - 0.90 %,
Si: 0.40 % (Max),
P: 0.035 % (Max.),
S: 0.035 % (Max.),

Notes:
1). Material: DIN C50 or BS970 080 M40.
2). Forging shall be free from defects like cracks, pitting, voids, excessive
scales and any other flaws detriment to quality of finish part.
3). Supplier shall deliver the forging in trimmed, isothermally annealed
to HB 156 -180 and shot blasted condition.
4). Uniformly distributed fine grain structure.
Grain size 5 or finer.
Inclusion shall not be greater than 3.

Kindly do examine this requirement and quote your most competitive
prices preferably on FOB as well as CFR Karachi basis.

If you have any queries, please feel free to contact us by e-mail or fax.
Meanwhile, please acknowledge receipt of this inquiry and send your
most competitive offer urgently by E-mail attachment or fax along
with supportive documents e.g. relevant brochure / leaflet / data-sheet etc.

Requirement of Pipe Fittings

date_range Oct 24' 2018/  Vietnam

Our company is based in Vietnam and we require Steel Gate Valves, like 20 pieces each of DN 100-16 ( HT200) and DN40-16 ( HT200) ( Stem + Disc = SS 316 or...
Ready to buy Plumbing Accessories/ Hardware/ Pipe Fittings

date_range Sep 18' 2018/  Australia

We recognized as an industry leader in engineering fluid transfer products, we are third generation Australian owned and operated business. To know more kindly visit our homepage. We are ready...
Ready to buy Automobile Parts

date_range Sep 11' 2018/  Japan

Since 1948, we have been a metal supplier for Japan and internationally supplying the best raw materials. Please visit our website for more details. We are ready to buy Auto...
Looking for Industrial Springs

date_range Sep 11' 2018/  Netherlands

We develop and produce technical springs and industrial wire products from wire and strip steel. Please go through our website for more details about our company. We are looking for...