• date_rangePosted On :   Apr 07' 2008
• location_cityCity :   QC
• languageCountry :   Canada
• content_pasteEnquiry No. :   8040741

Material: PE of ABS. We want to have plastic that will resist
to thermal break. Application usage will be made in temperature
below 0 Celsius degrees; therefore we need to use material to
resist to thermal break. We are open on the material.
Size: We absolutely require T dimension handle. No other handle
will be accepted Length of the top T handle: about 2.50 to 3 inches
Width of the T Handle: about 1.25 to 1.75 inches
Height of the T handle: about 2.0 to 2.5 inches
Height of the top T handle: about 0.80 to 1 inches
Center hole T handle: about 0.28 to 0.30 inches. It is a requirement
to respect same dimension of very similar hole dimension for
our application.
We do not need a ring at the bottom of the handle, it can be straight
bottom end. Color: Black color and plain. We do not need any
written information on the handle.
Weight: It is according to the dimension and the material use but
we believe in a range of 10 to 30 grams.
We are flexible for the weight.
Sampling: depending of the proposition and the dimension we
would require about 25 to 35 samples
First order: 30 000 units.