• date_rangePosted On :   Apr 03' 2008
• location_cityCity :   Alberton
• languageCountry :   South Africa
• content_pasteEnquiry No. :   8040383

Hi
I need a round plastic eye with led light (15mm) with a flat
battery box at the back. The led in front must flash
with an on//off small switch.

The other two attachments (Front and back) are just to show you
The finished look except the one you'll be doing is round

I need the product from you and not the mould, and will order these eyes
from you directly. Can't make the product here.

I need something like the attachment but 15mm - 20mm round (in diameter -
with width 1mm very thin) plastic with the flashing lights and a battery
case for the flat round batteries. (3-4mm width) Want to use the flashing
lights as eyes? See the front. Must have a on/off switch - size 5mm x 5mm.
Like a thin PVC. The front and back with battery casing must be one piece.
Must be child save. Must be very light. Can't weigh to much. I am using this
On garments. Maybe a few grams

Can you do this?

Regards