• date_rangePosted On :   Feb 03' 2008
• location_cityCity :   Haarby
• languageCountry :   Denmark
• content_pasteEnquiry No. :   8020331

Looking to buy Steel coils for manufacturing LPG gas cylinder,
hot rolled, Al-killed pickled and slightly oiled, quality according to
P245 NB DIN EN 10120 or BS1 AFNOR-36-211 or ISO 4978 item (2)
Deep drawing operation in one stage.
Surface is according to DIN EN 10025

Dimensions: width from 1060 to 1065 mm, thickness 3.2+/-0.1mm
Packing & Marking: The material to be sent as coils form, the coil
weight (10-12) tons. The coil inner diameter must be 610mm-620mm.
Each coil shall be wrapped in water proof paper, tied up with a steel
band and each coil attached with a label indicate to (manufacturer name,
dimensions, the melting number, the gross and net weight and the coil
number).

Mills certificate: Mills certificate according to manufacturers standard,
equal to DIN EN 10204 (3.1.B) and a document containing tests result
that been performed during manufacturing process of the steel coil
according to the above-mentioned conditions.

Inspection certificate: should be according to manufacturers standard,
equivalent to DIN EN 10204 (3.1.B), and should be sent before the
shipping coils

Sample: 300 KG Coil or Square Pieces (580mm x 580mm x 3.2mm)
for Test.

Inspection certificate: should be according
to manufacturers standard, equivalent to DIN EN 10204 (3.1.B)