• date_rangePosted On :   Sep 12' 2007
  • location_cityCity :   Philadelphia
  • languageCountry :   USA
  • content_pasteEnquiry No. :   7091233

Attn: Mills and Mill Agents (Only). We will not reply to
brokers/traders.

Re: Firm Inquiry

Note: If price is greater than USD $520/MT FOB
or more than USD $600/MT CNF Baltic or Meditterranean Port,
please do not offer.

Inquiry #1: 7200 MT.

Prime Newly Produced Hot Rolled Coils
S235 JRG2 and S235Q1 (modified) as per EN10025
Si: 0.03% max. and Si + 2.5 P = 0.09 % max.,. suitable for galvanized
Application Al: 0.02 % min.

S275 JO as per EN10025
Si: 0.03% max. and Si + 2.5 P = 0.09 % max.,. suitable for
galvanized application
Al: 0.02 % min.
Equivalent C (CEV): 0,40 % max.

S355 MC as per EN10149,
Si 0.15 * 0.25 % suitable for galvanized application class 3
Equivalent C (CEV): 0.40 % Max.

S355 J2G3 as per EN10025,
Si 0.15 * 0.25 % suitable for galvanized application class 3
Equivalent C (CEV): 0.40 % Max, Tensile strength (RM):
510 N/mm2 min. and elongation min. 23 % and for 7.64 and 9.66 mm
nominal thickness resilience have to be: min. 27J -20C

Tolerances acc. to EN 10051 (aiming � of EN 10051)
Mill's edges: 0/+20 mm
ID: 760 mm +/- 53 mm
OD: 2000 mm max.
CW : 15 +/- 3 Kg per mm width
End use: pipe making
Mill test certificates according to EN 10204/3.1

Specification & Size
S275 JO
100 MT 3.81 x 1,155 mm
150 MT 3.72 x 1,515 mm
350 MT 4.62 x 1,485 mm
500 MT 5.63 x 1,530 mm
100 MT 9.66 x 1,085 mm
125 MT 9.66 x 1,500 mm
1425 MT

S355J2G3
325 MT 3.72 x 1,515 mm
350 MT 4.62 x 1,510 mm
100 MT 5.63 x 1,530 mm
150 MT 7.64 x 1,500 mm
925 MT

S235 JRG2
100 MT 2.30 x 1,331 mm
400 MT 2.50 x 1,143 mm
100 MT 2.55 x 1,261 mm
400 MT 2.55 x 1,365 mm
200 MT 2.90 x 1,324 mm
200 MT 2.95 x 1,395 mm
1400 MT

S235Q1
100 MT 2.15 x 1,330 mm
150 MT 2.40 x 1,330 mm
200 MT 2.65 x 1,261 mm
300 MT 2.90 x 1,324 mm
500 MT 2.95 x 1,356 mm
250 MT 3.45 x 1,351 mm
150 MT 3.65 x 1,452 mm
1750 MT

S355MC
100 MT 3.65 x 1,452 mm
150 MT 4.55 x 1,446 mm
150 MT 5.55 x 1,440 mm
100 MT 3.30 x 1,351 mm
500 MT

S235 JRG2
400 MT 2.85 x 1,499 mm
200 MT 3.77 x 1,499 mm
200 MT 4.73 x 1,398 mm
400 MT 4.73 x 1,499 mm
1200 MT

Inquiry # 2: 5000 MT

Prime Newly Produced Hot Rolled Coils grade S235JRG2 acc to
EN 10025, un pickled, unoiled, without any tension and/or welds
and/or coil breaks and/or scratches and/or other surface defects,
suitable to be pickled, from continuous casting.
Coils might be supplied with fish tongue and tail up to 3/4 of the
width. Si 0.04 % maximum (minimum 85 % in 0.03 % max.) suitable
for galvanized application, Al killed
Tolerances acc. to EN 10051
Thickness tolerances: acc. to EN 10051
Mill's edges: 0/+20 mm
ID: 760 mm +/- 53 mm
OD: 2000 mm max.
CW : 14 -25 MT
End use: cut to length and/or pickling application
Quality certificates acc. to EN 10204/3.1.B

Specification & Size
Grade S235JRG2
Size MM M/T
2.50 x 1015mm 100mt
3.00 x 1015mm 750mt
4.00 x 1015mm 400mt
5.00 x 1015mm 100mt
6.00 x 1015mm 450mt
8.00 x 1000mm 400mt
10.0 x 1000mm 1,000mt
12.0 x 1000mm 250mt
4.00 x 1265mm 100mt
5.00 x 1265mm 100mt
6.00 x 1265mm 100mt
8.00 x 1250mm 200mt
10.0 x 1250mm 100mt
2.50 x 1500mm 150mt
3.00 x 1515mm 800 MT
Total 5000 MT

Looking forward to your offer.
Thank you, Sincerely,

Wanted Refractory Ceramic Fiber Blanket as Liners of Industrial Furnace

date_range Sep 20' 2018/  Spain

Since our foundation in 1962, we always remained committed to excellent service and quality in the manufacturing and sales of packings and gaskets. We enjoy the full trust and reliance...
Looking for Sealing/Gasket suppliers from India

date_range Sep 20' 2018/  Spain

Since our foundation in 1962, we always remained committed to excellent service and quality in the manufacturing and sales of packings and gaskets. We enjoy the full trust and reliance...
Steel Finished Products

date_range Sep 20' 2018/  Sri Lanka

We are specialized in international trading, importing and exporting. We also provide product sourcing and logistics services that help keep any sourcing product/services smooth and profitable. For further details...
Building and Construction Metal Bars

date_range Sep 19' 2018/  UK

Based in Uk we specialise in subcontract precision engineering, CNC machining, CNC milling and CNC turning. To know more please make a visit to our website. For building and construction...