• date_rangePosted On :   Aug 22' 2007
• location_cityCity :   Babol
• languageCountry :   Iran
• content_pasteEnquiry No. :   7082239

Dear Madam/Sir,
We have a client who want to establish a complete line
Consists of :
1- Slitting line-
2- Pipe welding making line ?
3- Rectangular pipe and tube forming line.
Some of the details which we need are: -
A complete slitting line for 1-4 mm thickness
and 1500mm width, 25 tons de-coiler and 25 tons re-coiler, speed
70m/min. With minimal possible slitting width strips ( 17 cutting
slits in 1-1.25mm thickness, 14 cutting slits in 1.25-3mm
thickness and 10 cutting slits in 3-4mm ). b- A complete carbon
steel pipe making line for 3 inches pipes ( maximum ) with
bi-lateral de-coiler + welding table ( for connecting the
remaining part of the past coil to the beginning of the next
coil ) + spiral reserve pit + leveler + forming + welding guide
and welding entrance + waste remover + welding part (modern
(transistor ) electronic and not the old types) + pipe catcher + saw
(cutting part) c- A forming line for making hollow rectangular
section pipes and tubes from the above mentioned pipes.
Rectangular tubes and pipes should be in these sizes: 20x10,
20x20, 25x10, 30x20, 40x20, 30x30, 25x25, 50x30, 40x40, 60x30,
60x40, 80x40. They want to be able to produce different shapes
of rectangular and square section tubes and pipes also hollow
sections with PR number : 507, 508 and 509 ( for window steel
frames (we are sending you the drawing of these items on your
fax). We highly appreciate yr soon reply as well as yr full
CFR B. Abbas port Iran.