• date_rangePosted On :   Aug 18' 2007
• location_cityCity :   Babol
• languageCountry :   Iran
• content_pasteEnquiry No. :   7081833

Dear Madam / Sir,
We have a client who want to establish a complete line consists
of: 1-Slittting line-2-Pipe welding making line-3-rectangular pipe
and tube forming line. Some of the details which we need are:
A complete slitting line for 1-4 mm thickness and 1500mm width,
25 tons de-coiler and 25 tons re-coiler, speed 70m / min. With
minimal possible slitting width strips (17 cutting slits in 1-1.
25mm thickness, 14 cutting slits in 1. 25-3mm thickness and 10
cutting slits in 3-4mm).
B-A complete carbon steel pipe making line for 3 inches pipes
(maximum) with bi-lateral de-coiler + welding table (for connecting
the remaining part of the past coil to the beginning of the
next coil) + spiral reserve pit + leveler + forming + welding
guide and welding entrance + waste remover + welding part
(modern (transistor) electronic and not the old types! ) + pipe
catcher + saw (cutting part)
C-A forming line for making hollow rectangular section pipes
and tubes from the above mentioned pipes. Rectangular tubes
and pipes should be in these sizes: 200x100, 200x200, 250x100,
300x200, 400x200, 300x300, 250x250, 500x300, 400x400, 600x300,
600x400, 800x400.
They want to be able to produce different shapes of rectangular
and square section tubes and pipes also hollow sections with
PR number: 507, 508 and 509 (for window steel frames (we are
sending you the drawing of these items on yr fax) .
We highly appreciate yr soon reply as well as yr full CFR B.
Abbas port Iran.