• date_rangePosted On :   Aug 07' 2007
• location_cityCity :   Tehran
• languageCountry :   Iran
• content_pasteEnquiry No. :   7080774

It is pleasure to contact with your company to me.
in attach you can find Poly Urethane Adhesive
properties, let me find your conformity to follow up.

We are looking forward to receiving your positive feedback
at your earliest convenience.

It is a high performance cold cure polyurethane elastomer. This product
is free from MOCA (methylene-bisorthocholoroaniline) and flammable
solvents, which produce an elastomer with good toughness,
high elongation, tear strength and abrasion resistance.
This compound is used in electronics parts for prevention of
corrosion, and undesirable changes in properties and work in
automotive and electronic parts.
Two component materials based on Polyurethane has some
properties that can found below.
Some properties are:
Liquid to paste Visually shape
Black Color
3000-4000 mpa.s Viscosity (25 deg.C)
1/2 hr Shelf Life for mixed
Component A : 3
Component B: 1
Mixing Ratio (by weight)
3 Minute in 25 deg. C Mixing Time
1 hr in 25 deg. C Curing Condition
8000 Psi
Compressive Strength
60 Hardness Shore A
-40?C to +100 0C Heat resistant
22 KV/mm Breaking Voltage
0.0224 % Water absorption
480-615 Volts /mil Dielectric Strength
0.0025 in/in Shrinkage during cure
320 Elongation (%)
145 Abrasion Resistance (mm?)
85 Tear Strength D470 (kN/m)
4350 Tensile Strength (psi)
Shelf life: 6 months
Storage: keep away direct sunlight and in cool place