Looking to buy the following:
1. Servo Motor with encoder feedback, IP54
2. 200-240VAC, 340VDC Bus
3. 4500 RPM maximum speed, 3000 RPM rated speed or similar
4. 50w
5. 54mm square face or less
6. 3 inches long or less
7. One 2m power cord-4 leads-molded at motor end-flying
leads at other end-U, V, W and Ground wires
8. One 2m encoder feedback shielded cable-molded at
motor end-DB15 at other end per pinouts with specifications.
A. 2000 PPR encoder or better (2000 PPR or 8000 counts per
revolution with quadrature encoder)
B. 15 pin D Shell-Male
C. Pin 1 = A +
D. Pin 2 = A-
E. Pin 3 = B +
F. Pin 4 = B-
G. Pin 5 = Z + (index pulse)
H. Pin 6 = Z- (index pulse)
I. Pin 7 = Ground
J. Pin 8 = Shield
K. Pin 9 = + 5VDC
L. Pin 10 = Hall A +
M. Pin 11 = Hall A-
N. Pin 12 = Hall B +
O. Pin 13 = Hall B-
P. Pin 14 = Hall Z +
Q. Pin 15 = Hall Z-
9. CE and UL certifications required
date_range Jun 14' 2018/ Uzbekistan
date_range Jun 13' 2018/ Singapore
date_range Jun 07' 2018/ USA
date_range Jun 07' 2018/ Netherlands
