• date_rangePosted On :   Mar 15' 2007
• location_cityCity :   Queensland
• languageCountry :   Australia
• content_pasteEnquiry No. :   7031564

We are a pallet manufacturer in Australia and require
material ASAP we can purchase the material FOB or CIF.
We require approx 80t per month of cheap PP material,
with a MFI of approx 4-12. We are currently using a green
colour material similar to the "colour bond mist green"
colour we would also be able to use a material that can
be master batched to green. Our current material is being
used as a Talc filled material at 25-30% and a UV
stabilized for 8 years and it would be better if we can get
the talc and UV added all in one process.
The material must be PP or similar high strength, the
material can be of lower than 'A' grade as the final finish
is not important but the strength is, so the price can be
quite low. We have tried a PP / PE material but the
strength is too low, post consumer material may be OK
but it just cannot contain any metal or contaminants that
may cause de-lamination.
Please supply price ASAP and also include your preferred
method of payment and shipping details (lead time and
expected shipping time to Melbourne port Australia.
We also have requirement for HDPE, Black material and
also PE material in virgin suitable for manufacture of
water tanks.