• date_rangePosted On :   Feb 15' 2007
• location_cityCity :   Minnesota
• languageCountry :   USA
• content_pasteEnquiry No. :   7021535

Looking For Brew Pots
We are retail home brew and wine supply company. We have been
in business for over 10 years. We are a leader in our industry
and are looking for new avenues to grow our business. We are
looking for Stainless Steel Brew Pots in several sizes.
Please see description listed below:
The kettles are totally seamless. The bottom of the kettle has
three layers--an aluminum layer is sandwiched between two
stainless steel layers for superior heat dissipation. The
bottom of the kettles are 5 mm thick. All of these pots come
with a heavy-duty stainless steel lid, and hollow handles.
Sizes that we are looking for:
32 quart. This pot has a capacity of 32 quarts, or 8 gallons.
It is 13" tall and 15" in diameter. Wall thickness is 1. 0 mm.
40 quart. This pot has a capacity of 40 quarts, or 10 gallons.
It is 13" tall and 17" in diameter. Wall thickness is 1. 0 mm.
60 quart. This pot has a capacity of 60 quarts, or 15 gallons.
It is 15" tall and 19" in diameter. Wall thickness is 1. 2 mm.
80 quart. This pot has a capacity of 80 quarts, or 20 gallons.
It is 17" tall and 21" in diameter. Wall thickness is 1. 2 mm.
100 quart. This pot has a capacity of 100 quarts, or 25
gallons. It is 21" tall and 21" in diameter.
Wall thickness is 1. 2 mm.

We are also looking to see if it is possible to do this to the
brew pots as well:
We would like two all-stainless steel welded 1 / 2" ports. The
upper port would be have a 1 / 2" stainless steel plug .
The lower drain port would be fully threaded on both the
inside and outside of the kettle. We would like these pots to
include a 1 / 2" stainless ball valve and threaded nipple
for installation, and a 1 / 2" MPT plug for use without a
thermometer. We would want to purchase the brew pots in a
ported and non ported version. Meaning that some of the pots
would have the two 1 / 2" fittings as listed above, and some
would not have any holes drilled or spigots attached.
We are willing to wire transfer money for purchase of these
items. We would like to inspect quality of item prior to
placing order for these wort chillers.
We would like to find a supplier and have product in hand
within the next 2 months. Feel free to contact us with any
questions.