• date_rangePosted On :   Jul 30' 2006
• location_cityCity :   Indore
• languageCountry :   India
• content_pasteEnquiry No. :   6073001

We need oil hydraulic press of following
specifications
Oil Hydraulic Press Specification
1) Platen Size: 10.3 m length x 2.15 m wide
2) Multi Gate type Press
3) Upper bolster fixed with top
4) Bottom bolster floated with Hydraulic cylinder rams
5) No. of Cylinder:Minimum-10 Nos., Maximun-24 Nos.
6) Ram size: 600 mm diameter when no of ram = 10 ,
300 ? 450 mm diameter when no of ram = 24
7) Stretching devise at one end & clamping device at
other end.
8) The press must have bottom bolster parallelism
mechanism device i.e bottom mounted torque shaft.
9) Press must be capable to withstand 30Ksc to 40 Ksc
specific pressures
10) Hot platens are steam heated or hot oil heated with
even temperature all over the surfaces and both end with
cooling devices

Further we also need 12 nos of chilled cast iron ram
of 400-450 mm dia with stroke length 500-600mm ,
single acting , bottom feeding & same no cylinders for
conveyor belting press. We also need 3 nos of steam heated
platen of 60 mm thick x 5.5 m long x 1.55 m wide

We also need 22? x 60? two roll mill , 75L/55L
Intermix/Banbury , 22?x66?/68? 3 / 4 roll calendar
Kindly quote for the above as well as any other press /
intermix / calendar (to calendar 1600mm wide rubber)
reconditioned available with you to manufacture Rubber
Conveyor Belt