• date_rangePosted On :   Jul 28' 2006
• location_cityCity :   Athens
• languageCountry :   Greece
• content_pasteEnquiry No. :   6072825

We are interested to procure 45.000 pairs of PVC protective
gloves against fuel oils.

The gloves should be made from PVC material with antisweating
lining and antibacterial protection which should be marked
upon the glove (the antibacterial protection).

Their Length should be minimum 35 cm and have anti-slip
formation (shape) on the whole surface of the palm and fingers
(grip side of glove).

Should be CE certified and fulfill the requirements of EN 420,
EN 388 (Minimum Protective Levels 3.1.2.1. ) and EN 374.

So, gloves should have at least the following markings upon
them: "CE" Pictograms for protection against mechanical
(EN 388) and chemical (EN 374) hazards, and also the
antibacterial protection marking.
The protection levels agaist mechanical hazards of EN 388
(Minimum 3.1.2.1. )

For compliance with the above, evaluation sample, prospectus
and certificates issued by notified body will be requested.

Packing way: Per 100 pairs within strong cartons.

The delivery time should not exceed 2 months per 1/3 of the
quantity (15.000 pairs x 3) for goods delivered in our
warehouses in Greece.

Only serious replies will be answered by end of august.