• date_rangePosted On :   Jan 05' 2006
• location_cityCity :   Karachi
• languageCountry :   Pakistan
• content_pasteEnquiry No. :   6010535

Our Current Requirements are:
1. a. TFO (Two For One) Twisters:
At present one of our customer's requirement is for Short
Fiber/Spun yarn machine count ranges from 15/2 to
80/2 ECC (English Cotton Count), In our country (Pakistan)
due to high electric cost people do not prefer machines with
heavy Electric load, therefore we prefer those machines which
have about 160 spindles per deck and the Total electric load
may not exceeds 11 Kw per deck. In our opinion to achieve
this only those machines, which may have smaller Pot Dia of
around 90mm, may serve this purpose. .
Kindly check whether MURATA'S model 308 II comes to
our required specifications? Each machine may be of 2
Decks (320 + - 10 spindles per Machine) matching to these
requirements.
We also need Assembly winders of suitable capacity (may
feed up to 4 of these type of TFO machines).

1. b. TFO:
One of our customers is looking for TFO (Two For One)
Twisters (Silk/Polyester), where Twist spindle may hold big
size Flanged Bobbins and on Take up it may produce Cones,
with "0" degree angel or angled cones.
Kindly offer us machines which are according to above
specifications.
Along with this offer please also quote us for pre-winder
suitable for these twisting machines.

2. Ring Doubling Twisters:
These twisters are also required for Short Fiber/Spun
Yarns; again the priority is for more spindles on the
minimum possible Total electric load. Ring Dia 50mm or
above, Lift 10 inches or above.
Preferable Make: Kaji, Howa, Toyoda, or any other well
known Japanese make, European makes are also acceptable.
We also need Cone Winders to wind Twisted/Doubled
yarn from twisted Pirns to cones.

3. Fancy Twisters.
Fancy Twisting OZEKI of Japan. One or our customer requires
this equipment. Requirement is for Model number ON- 700
series If Korean and or good brands coming up to
specifications of OZEKI models indicated please offer us.