• date_rangePosted On :   Jul 24' 2005
• location_cityCity :   Karachi
• languageCountry :   Pakistan
• content_pasteEnquiry No. :   5072457

1. We have 4 basic requirements of yarns
Polyester
Polyamide/Nylon Filament
Bare Spandex

Polyamide: -
PA6 dull, round, flat 50/12
PA6dull, round, flat 22/Monofilment
PA6 bright, trilobal, flat 48/12
PA6 dull, round, flat 50/10
PA6 semidull, round, flat 48/12
PA6 semidull, round, flat 82/24

Polyester: -
Pes semidull, round, flat 84/32
Pes dull, round, flat 26/monofilament
Pes semidull, round, flat 72/36
Pes semidull, round, flat 23/Monofilament

Polyamide(PA6(or)PA6.6): -
Dtex 50 f10 PA6 dull, round, flat.
Dtex 48 f12 PA6 semi dull, round, flat.
Dtex 84 f32 PA6 semi dull, round, flat.
Dtex 48 f12 PA6 bright, trilobal, flat.
Dtex 82 f24 PA6 semi dull, round, flat.
Dtex 22 PA6 Momofilament, dull, round, flat.

Polyster (PES): -
Dtex 84 f32 PES semi dull, round, flat.
Dtex 26 PES Monofilament dull, round, flat.
Dtex 72 f36 PES semi dull, round, flat.
Dtex 50 f36 PES dull, round, flat.
Dtex 23 PES Monofilament dull, round, flat

Bare Spandex
A) 20D,40D,70D,140D,210D and 280D (All round form)
B) 560D,840D,1120D (Round Form)
C) 560D,840D,1120D (Tape Form)

Cotton yarn:
20S/1,30S/1,32S/1,36S/1,40S/1,60S/1

2. We are hereby requesting you to send further details
of your yarns with the following specification

Beaming (Pre Stress & Final Stress)
Max/Breaking Elongation
Tensile Strength
Modulus
Specific Gravity
Sticking Temperature
Moisture Regain
Heat Setting Temperature for PA & PET

3. Please quote your price at C&F/CFR Chittagong, Bangladesh