• date_rangePosted On :   Jun 24' 2005
• location_cityCity :   Baroda
• languageCountry :   India
• content_pasteEnquiry No. :   5062412

Dear Sir/s,
We have an urgent firm inquiry for Iron Powder as per
the specs. Mentioned below. Kindly check its availability
& quote your most competitive prices at the earliest.

1) 21 MT of Iron Powder according to Specs. ASC500 as follows:
Chemical Specification:
Element Max(%)
Cr 0.04
Mn 0.15
Si 0.15
Fe 98.9 min
Cu 0.04
Mg 0.1
Zn 0.01
Ti 0.1
Al 0.1
C 0.02

Grading Specifications:
mm Max
+500 15%
-75 10%

2) 21 MT Iron Powder with chemical parameters the same
as above but size
Distribution should go towards 425 micron
And density : 3.7 g/cm3 (electronic Industry)
3) 20 - 40MT of Iron Powder (ASC 100.29 Hoganas) -
of the Specs. Given below:

Apparent Density: 2.95 g/cm3
Flow - 24 sec/50g

Sieve Analysis:
+212 microns - 0
+150 microns - 8%
-45 microns - 23%

Chemical Analysis(%):
Carbon < 0.01
H2 - loss : 0.08

Compressibility (g/cm3):

Compacting Pressure Lubricated Die 0.6% Kenolube P11
0.8% Zinc-st

400 Mpa 6.77 6.79 6.82
600 Mpa 7.19 7.19 7.17
800 Mpa 7.45 7.36 7.31

Green strength(%):
Compacting Pressure Lubricated Die 0.6% Kenolube P11
0.8% Zinc-St

400 Mpa 11 8
600 Mpa 38 16 12
800 Mpa 18 14

Your prices should be (in Rupees) for JNPT, Mumbai.
Kindly send us your specs along with the offer for
approval. Also advice us your packing details, payment
terms, delivery period & validity of prices.
Awaiting an early reply,
Thanks & Regards,