• date_rangePosted On :   Mar 22' 2013
• location_cityCity :   Seattle
• languageCountry :   USA
• content_pasteEnquiry No. :   B-125062

We are looking to buy following polypropylene fabric:
Bulk (Roll) nonwoven material.
Material; Polypropylene,
Weight: 50gsm,
Color: White / to off White
MD Tensile Strength, N/5cm: 155,
CD Tensile Strength N/5cm: 75,
MD Elongation at Break (%): 60,
CD Elongation at Break (%): 75,
Water Repellency / Hydrohead (mm water): 390,
ROLL; 3" Roll Cores, 48" width material, either 30 or 45" diameter rolls are acceptable.
Other Specification Notes:
(I) Supplier to provide recommended tolerances for each specification measure which will be used to finalize specifications and to set acceptance criteria. Certificate of Analysis to be provided before each shipment.
(II) Bond Pattern: The bond pattern is critical to the consumer experience and shall be agreed to based on visual and tactile samples. Acceptable bond patterns will be discrete patterns on approximately 190 bonds per square inch. Once a bond pattern
is agreed to, it must not be changed without Spencer Asset Holding?s agreement in writing, and further, bond area must be closely monitored and reported.
NOTE: Do not quote on material, which does not meet 100% of our specifications. We are not interested in quotes on other materials.
Thank You.